OMNIFLOW
OWNER’S MANUAL
7
Insert the fuse
1
4
Install the Omniled.
Keeping the protections.
Verify communications
2
5
Insert the bolts into
the holes and tighten
Drill the mast
Using the mold
(Recommended drill size M11 / Metal thickness 4mm)
3
6
Remove the protections
after installation
Install the Omniled after mast installation
PIR sensor
Bolt tightening torque
Bolt Size (mm)
Strength Grade (N·m)
10
33
The OMNIFLOW® should be ready for operation