OMNIFLOW
OWNER’S MANUAL
4
OMNILED® smart system should be installed [and maintained] by qualified
personnel using appropriate safety gear.
Never touch any stripped cable ends or un-insulated connections. The elec-
trical installation must be done by a qualified professional in accordance with
the rules in force in each country.
Never move body parts or objects through the turbine because even if this is
not in operation is easily actionable with a slight breeze.
Dont loose the rotor until all instalation is complete.
Please only install this product in open spaces without solar shading in the
device and with “clear” wind flow as suggested in page 6 diagram
Motion sensor is easy damaged if the device is not handled with care. Do
not remove the protective foams until the installation is complete and do not
touch the LED/optic lens with your bare hands.
Check communications in OmniConnect platform. This should be done
1-5min after connection the fuse with the lifting equipment still in place in
case anything is not correct. Do the LED test if unit has LED’s.
Safety Instructions
Caution: Please read these instructions carefully before installation