Omnicomm LLS-AF 4, Manual

Page: 27 / 31

EN
26
Fuel tank calibration
Calibration of the tank is required to set the digital output code sent
by the product to the fuel volume in a particular tank.
The calibration of the fuel tank is represented by filling the tank with
fuel from empty to full, with a predefined number of steps and filling
of sensor readings in the calibration table.
To install two or more products in tank it is necessary to make the
calibration table for each product.
Sealing
1. Press the seal cap to make it snap shut
2. Install the seal on the connector
3. Specify the numbers of the security seal, cap and pull tight security
seal in the act
Transportation conditions
Products can be transported in closed transport of any kind and to
any distance.
The sensor can be transported in its package at environmental
temperatures from - 60 to +85 °C, with the necessary protection from
bumps and vibrations.
Omnicomm limited warranty*
OMNICOMM warrants that this product, under normal use and
conditions, will be free from defects in materials and workmanship
for a period of 60 months from the date of original purchase.