57
Mixer
Low Band
Adjusts the output level of the low band limiter into the following Final Limiter stage. Higher
numbers result in more low frequencies (bass) but too much mix level can make the following
final limiter work unnecessarily hard.
Mid Band
Adjusts the output level of the mid band limiter into the following Final Limiter stage. Higher
numbers result in more midrange but too much mix level can make the following final limiter
work unnecessarily hard.
Presence Band
Adjusts the outpu
t level of the presence band limiter into the following Final Limiter stage. Higher
numbers result in more presence but too much mix level can make the following final limiter work
unnecessarily hard.
Hi Band
Adjusts the output level of the high band li
miter into the overall mix. Higher numbers result in
more high frequencies and too much mix level can make the following final limiter work
unnecessarily hard.
<-Exit
Click on this option to return to the
Adjust Processing
submenu.
Sensus
See a descriptive overview of the Sensus
function beginning on
Page 21
.
Sen Freq (Sensus
Frequency)
This sets the range where the SENSUS
function begins its magic. For example, a setting of
5kHz will program
the SENSUS
algorithm to focus on frequencies of 5kHz and higher. You
should start with the 13kHz setting, and then select lower frequency settings until any coding
artifacts are tamed. There are 8 available adjustment frequencies between 13kHz and 1kHz.
Sen Level (Sensus
Level)
Sets the amount of codec conditioning to be applied to the audio. Increasing the setting adds more
SENSUS
control. Extreme settings -- those high enough to cause noticeable dulling of the
program material -- are unnecessary and will not further improve the audio quality through the
codec.
Ster Link (Stereo Link)
Under most operating modes, this can be set to Low or OFF. The link control allows dynamic
coupling of the stereo to mono ratio. When set to OFF, the Sensus
function will only affect
mono material, or signals that are common to the Left/Right channels under stereo conditions.
Higher settings of the link adjustment may offer assistance with low bitrates and an inefficient
codec.