Preset File Transfer
Shown below is the top half of the File Transfer screen, which is used for saving and loading user processing presets
to and from your computer.
Any user presets on the OmniaONE will show up as buttons under
User Presets
in the
Download Presets
section.
4 user presets are shown in the example screenshot above.
NOTE:
The factory presets will not show up here and cannot be downloaded to your computer.
To download and save a user preset to your computer, click on a preset name button and your browser’s “File
Download” box should pop up.
Click the “
Save
” button, choose the desired folder to save the preset in from the “
Save As
” dialog (this may vary
with the OS) and click “
Save
” to save the file or “
Cancel
” to abort.
Presets are saved as small, text-based files with the “.opr” extension.
To upload a previously saved user preset to the OmniaONE, use the file entry box (or the browse button) to enter the
path to the preset file name to be uploaded and press the “
Upload
” button.
The preset will be saved to the OmniaONE with the same name as the selected file, minus the .opr extension.
NOTE:
In the current software, after uploading a preset with the remote, that preset’s name will not appear in the
preset list on the front panel of the OmniaONE unit until a preset save, rename or delete operation is performed from
the front panel itself.
So, after uploading a preset to the unit from the remote, simply save any preset as a new name, rename a preset or
delete a preset using the front panel jog wheel and the uploaded preset should then show up in the front panel’s
preset list.
I/O Configuration File Transfer
Similarly, I/O configurations can be saved to or loaded from your computer.
54
