26
Input Metering
There are 2 horizontal stereo input meters
below the Dorrough Loudness Monitor
in the Summary tab: (Note: the
Detail and Analysis tabs are not yet implemented here)
Input Metering Screen (Summary Tab)
Primary Input
shows the real
-time
peak
inpu
t level of the input selected with the
Input Source
control in the menu
area.
Secondary Input
will show the real
-time
peak
input level of the input selected
as the
Failover Source.
Please see the
Proper Setting of Input Levels
section on Page 12 for full
details on the setting of the input levels.
The
Dorrough Loudness Monitor
shows the average loudness and peak level of the
audio at the same time.
When you are in the Input menu, the Dorrough meter automatically switches to monitor the Input L+R audio.
It
defaults to monitoring the FM channel’s Output when you are in any of the processing menus or the Output menu.
Since the output monitor point is after the FM clipper and pre
-
emphasis, you can also choose to add de
-emphasis
using the Dorrough Meter “
De-emphasis
” control which is located in the
Advanced
tab of the Output menu.
Output Configuration
Output metering can be found in both the Summary and Detail tabs
in the Metering area. (See
Output Metering
on
Page 28 for details
)
There are 7 subgroup buttons on the left side of the Menu area
in the Basic tab and there is 1 control in the
Advanced tab.
5 of the subgroup buttons
group the output controls that ar
e displayed by output type and the bottom
2 access special
options for the FM and HD outputs.
To get started, t
ouch the
Output
icon button to display the
Output
screen and then touch the
Basic
tab in the Menu
area if it is not already selected. The controls will be described by group below.
