Omni International OMNI THq, User Manual

Page: 8 / 16

8
SECTION 2 — ROTOR-STATOR GENERATOR PROBES
2.1 INSTALLING ROTOR-STATOR
GENERATOR PROBES
Stainless steel and plastic Omni Tip™ rotor-
stator generator probes are easily installed
to the Omni TH
Q
motor by means of a quar-
ter-turn bayonet mount. Simply push the
generator probe into the motor housing as far
as possible, turn clockwise, and release.
The Omni TH
Q
is ready to operate.
WARNING: The tip of the saw tooth
generator probe is sharp.
CAUTION:
Remove the blue protective
cap from the stainless steel generator
probes before processing. Replace the
blue cap when not in use.