Omni International OMNI THq, User Manual

Page: 10 / 16

10
3.2 STAINLESS STEEL GENERATOR PROBES
Stainless steel generator probes are also available for the Omni TH
Q
,
but are not supplied with the instrument.
Description Part Number
5 mm x 75 mm Stainless Steel Generator Probe
B5-75
7 mm x 95 mm Stainless Steel Generator Probe B7-95ST
10 mm x 110 mm Stainless Steel Generator Probe B10-110ST
12 mm x 110 mm Stainless Steel Generator Probe B12-110ST
3.3 MOTOR DRIVE UNIT
The Motor drive housing should be wiped off after use, especially
when concentrated and potentially damaging liquids are used during
processing. Never use solvents to clean unit or accessories.
3.4 MOTOR BEARINGS
The Omni TH
Q
, Digital Tissue Homogenizer motor is equipped with
sealed ball bearings. Under normal use they require no additional
lubrication.
3.1 SPECIFICATIONS
Motor Speed: 8,000 - 32,000 rpm
Processing Capacity: 0.1-150 mL
Height (motor only):
21.92 cm (8.63 in.)
Weight (motor only):
340 g (11.99 oz.)
Electrical Requirements:
115V, 60Hz or 220V, 50Hz
Standards Approval/Compliance: CE Certified (220V)
NOTE:
The
TH
Q
is equipped with a universal power supply which
works with an input voltage of 110V-230V at 50 or 60 Hz
SECTION 3 — MOTOR MAINTENANCE