General Operation
Language Setting
Turn unit off. Press and hold
while powering on unit.
to select.
Choose from French, English, German, Italian, or Spanish.
Programming Mode
- When the settings are entered press up
or down
to return to the program option.
- Press “Run” to start.
- At the end of the program “DONE” will be displayed Followed by “REMOVE SAMPLES”.
- If run is stopped system status will read “PROGRAM PAUSED”.
- Pause or Stop a run anytime by pressing the “STOP” button.
- Press “STOP” again to cancel current run.
PARAMETER
OPERATING RANGE
S
Speed / Energy
From 0.8 m/s to 6 m/s
T
Time
From 0:01 to 9:59 in increments of 1
second
C
Number of Cycles
1 to 10
D
Dwell/Pause between Runs
0:00 to 9:59
PROG 01
20 oC
S =4.50
C=02
T=0:10
D=0:10
READY
UP and
DOWN - navigate through menu.
LEFT and
RIGHT - adjust the parameters.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1. Program Number
2. Speed
3. Cycle Time
4. Navigation Buttons
5. Parameters Adjustment Buttons
6. Processing Chamber Temperature
7. Number of Cycles
8. Time interval or Dwell between each cycle
9. Run Button
10. Stop Button
