8
Fig.10
Install the electricity plug to an appropriate position according to safety standard.
Install the mounting plate as fig.11.
Note: ensure the base board is in horizontal.
Fig.11
Fix the base plate onto the frame with four expansion bolts (Fig.11) and put the motor on the
base plate, regulate the output gear to match the gear rack, then fasten the nuts. (fig.12)
Fig.12
Weld the cylindrical nuts for gear rack fixed on proper position in the lower part of door(Fig. 8),
then fasten the gear rack onto the cylindrical nut by bolts or welding. Regulate the washer
behind the base plate base to make the gear match the the rack. (Note: the distance between
gear and gear rack should keep1-2mm )
The limit way of this model is through electrical magnetic limit switch. Please follow fig. 7 and fig.