Copyright © 2015 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Page 8/30
Section A - Preparing for Installation; Removal of Factory Top
1.
Soft Top owners
: Refer to owners’ manual for instructions
on lowering factory top. Once lowered, unscrew shoulder
bolts fastening it to vehicle’s roll bars. Remove canvas from
assembly.
Hard Top owners
: Refer to owners’ manual for instruction on
removing factory hard top. Skip to STEP 4 once hard top is
removed.
Hardtop owners will need to purchase a factory header,
tailgate bar, and tailgate bar retainers (LH, RH).
These factory parts are required:
Header - 68003646AA
Tailgate Bar - 55395757AC
Tailgate Bar Retainer, RH - 55395760AB
Tailgate Bar Retainer, LH - 55395761AB
Note
: After removing header and factory soft top, place
assembly on ground as shown on right.
Tools Needed:
Phillips head screw driver
Torx bit socket wrench (T30)
Carefully read and understand all instructions before proceeding. We recommend you save all
parts and hardware if you ever choose to re-install the factory top.