Version February 2020
EN
15
HST 300 Smart User’s Manual
O . M . I . S . A . S r l
Via Verga 9/11
20845 Sovico (MB), Italy
welding reports currently in system memory in the previ-
ously selected file format.
8.3 Downloading by Commission Number, Date or
Report Range
After the file type was selected, the next screen offers a
“By Commission Number,” a “By Date Range,” and a “By
Report Range” options. Depending on the selection, the
ñ
and
ò
arrow keys can be used to select from the com-
missions currently in system memory the desired one, of
which the reports should be downloaded, or the
ï
,
ð
,
ñ
,
ò
cursor keys can be used to enter a start date and an end
date, or the first and the last report, that define a range
of dates or a range of reports of which the reports should
be downloaded. When you press the START/SET key, you
cause the selected reports to be transferred to the stor-
age media.
8.4 Understanding the Report Download Process
The download starts automatically after a selection was
made among the options. Wait for all the selected reports
to transfer and the “Download completed” message to
appear on the screen.
If a problem occurs while the download is in progress, a
“Not ready” message shows. After the problem condition
is cleared, the download resumes automatically.
Info
If the welding unit recognizes a problem that
cannot be cleared while the data transfer is in
progress, it does not resume the process and dis-
plays a “Download cancelled” error message. To
acknowledge this error, press the START/SET key.
8.5 Deleting Data from Memory
The report data in memory can be deleted only after all
welding reports were transferred, which is indicated by the
“Download completed” message. When the storage media
is unplugged, a “Delete Memory” message appears. If the
START/SET key is pressed at this point, a further confirma-
tion message “Delete Memory, sure?” is shown, which has
to be confirmed by pressing the START/SET key once again.
Then, the report data in memory are deleted.
8.6 Keeping Data in Memory
When the cable or storage media is unplugged, a “Delete
Memory” message is displayed. Press the STOP/RESET key
