Omicron VBO3, User Manual

Page: 7 / 25

2 Safety instructions
Before working with VBO3 , carefully read the following safety instructions and the safety instructions
for the CMC test set in use. In addition, we recommend to read the user documentation of the CMC
test set in use.
VBO3 may only be operated by trained personnel. Any misoperations can result in damage to property
or persons.
Only operate VBO3 after you have read this user manual and fully understood the instructions herein.
If you do not fully understand any safety rule or instruction or any part thereof, contact OMICRON
electronics before proceeding (→ page
23 ).
2.1 Symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
NOTICE
Equipment damage or loss of data possible.
2.2 Rules for use
► VBO3 and its accessories must only be used when in a technically sound condition. Its use must
be in accordance with the safety regulations for the specific job site and application.
► Always be aware of the dangers of high voltages. Pay attention to the information provided in this
user manual and in the user documentation of the CMC test set in use.
► VBO3 is exclusively intended for the application areas specified in section Designated use on
page 5. The manufacturer/distributors are not liable for damage resulting from unintended usage.
The user alone assumes all responsibility and risk.
► Keep this manual available on site where the VBO3 is used. The instructions provided in this user
manual and the associated manuals are considered part of the rules governing proper usage.
Safety instructions
OMICRON 7