background image

Manual version: ENU 1210 05 02 - Year: 2018

© OMICRON electronics. All rights reserved.

This manual is a publication of OMICRON electronics. All rights including translation reserved.
Reproduction of any kind, for example, photocopying, microfilming, optical character recognition
and/or storage in electronic data processing systems, requires the explicit consent of OMICRON
electronics. Reprinting, wholly or in part, is not permitted.

The product information, specifications, and technical data embodied in this manual represent the
technical status at the time of writing and are subject to change without prior notice.

We have done our best to ensure that the information given in this manual is useful, accurate, up-to-
date and reliable. However, OMICRON electronics does not assume responsibility for any
inaccuracies which may be present.

The user is responsible for every application that makes use of an OMICRON product.

OMICRON electronics translates this manual from the source language English into a number of other
languages. Any translation of this manual is done for local requirements, and in the event of a dispute
between the English and a non-English version, the English version of this manual shall govern.

VBO3 User Manual

2

OMICRON

Summary of Contents for VBO3


























Reviews: