Omicron DANEO 400, User Manual

Page: 26 / 80

DANEO 400
26
5.1 Acquisition
This section describes the necessary steps to create and configure a measurement system, configure
the system under test, place devices and IEDs onto a substation network diagram, map GOOSE and
Sampled Values streams to devices inputs, record, and observe signals.
1 2 3 4 5
6 7
1 Takes you to the home screen. The file closes and the application disconnects from the device.
2
Menu bar: Provides options for saving files, open the Options dialog to select/assign
application default values, update firmware and license, and run a device diagnosis.
3 Navigation pane: To navigate within each view of the Acquisition workspace.
4 Navigation toolbar: To switch between different views.
5 To open the Help or the About dialog.
6 Expands/collapses the Message board.
7
Message board: To track the most important events, which are classed by colors. The
contents can be saved to a file or cleared.