CPC 100 V1.41
11 - 4
IP address
This is the unique network address of
CPC 100
. You need this setting only if
static IP addresses are used. Your system administrator will provide you with a
valid static IP address.
Subnet mask
This is the filter for the IP address. It has to be identical for all devices within one
network. You need this setting only if static IP addresses are used. Your system
administrator will provide you with a valid subnet mask.
Default gateway
This is the address of a local IP router on the same network the CPC is in. It is
used to enable data traffic to destinations beyond the local network.
Commonly, the default gateway is not needed and can therefore be set to
0.0.0.0 for DCHP/Auto IP. This setting is only accessible if static IP addresses
are used. Your system administrator will provide you with details.
DNS
This is the address of the
D
omain
N
ame
S
ystem server.
Commonly, this address is not needed and can therefore be set to 0.0.0.0. This
setting is only accessible if static IP addresses are used. Your system
administrator will provide you with details.
Summary of Contents for CPC 100
