Current amplifier CMA 56
12
2.3
System Start
The following instructions can be followed step by step if the PC is properly
installed and set up.
For CMC for DOS software versions < 2.45:
First install a software version
2.45.
The CMA 56 can only be operated with a CMC for DOS software version
2.45 or higher.
The following procedure should be followed for interconnecting the system
components:
1. Connect the CMC test device and the PC by means of the 25-pin
connecting cable.
2. Connect the CMA 56 and the CMC test device by means of the supplied
connecting cable.
1
• CMA 56: socket "Ampl. in." at the back panel.
• CMC test device: Socket "Gen. out 1-6"
(optional: "Gen. out 7-12") on the back panel.
2
3. Connect CMA 56, CMC test device and PC to the mains supply (cable
supplied).
1
The supplied cable has the required electromagnetic compatibility.
2
For CMC 56 test devices with serial no less DExxxx: socket “ext. Ampl.“ on the back panel.