3. Thermal Protection:
The output throttle from the ESC will be limited (not over
50 % ) with the thermal value you have preset . ( The
Thermal protection will be dismissed when the ESC
temperature drop to 65℃)
4. If t he voltage protection and temperature protection
set off, and when the voltage and temperature become
abnormal , the LED status will indicates the problems
correspondingly , but will not limit the throttle output
and will not close all ESC timing.
5. If the ESC detected the motor have the driving
problem ( like motor rotor locked or motor phase lost
problem) which can cause the motor not run smoothly,
and when the throttle trigger leave neutral position
for a while, then the ESC driving abnormal protection
will be activated, and the motor will emit special tone
like beep-beep-beep ( note: some motors can not beep
or beep with a low sound if motor have phase loss
problem ), and the protection will be closed until you
released the throttle trigger to neutral position for 0.2
seconds. If this problem occurs three times continuously,
then you have to solve the motor driving problem
rst,
or the protection will exist all the time.
2. With RCOMG Bluetooth, connected the RCOMG app
to the ESC, the user can program parameters, upgrade
f irmware and check the real-time data of the ESC on the
APP.
3. Due to the range limit of Bluetooth, the operational
distance is around 10 meters.(If there are many metals or
other strong interference signals or obstacles around
will short the operational distance)
4. The Bluetooth name can not be changed.
5. The Bluetooth connecting will be failed during the
ESC throttle calibration process.
Bluetooth
1. Reset password : When the ESC turns on, press and
holding the power button around 10 seconds, the ESC will
restore the Bluetooth password to default setting 0000.
1. The user can program parameters at any status if the
ESC turns on, and new programmed parameters will be
took effect immediately, no need to restart the ESC, it
means the programming parameters can be competed
online, so it can provide a very intuitive feeling between
the before programming and after programming.
There will be some impacts on the battery/ESC/motor
if you program some parameters when the motor in a
high-speed rotation. For example, if you changed the
motor rotation when the motor in a high-speed rotation,
then the ESC will drive the motor reverse immediately,
but the motor can not be reverse immediately because
of its inertia, then it will cause a big current and vibration.
Or when the Boost or Turbo timing opened, but you set
Programmable Items
