Do not let children use this product without the
super vision of an adult.
The ESC might get hot during use, be careful
when handling it.
When soldering input / output wires and
connections, set the iron to 60W minimum.
Always disconnect the batter y after use, do not
store with the batter y connected.
Do not use near ßammable materials.
If the ESC overheats, emits smokes or burns,
immediately discontinue use, disconnect the
batter y and seek assistance.
Caution
DR-30A
Please read the manual
carefully before using
Thanks for purchasing our Electronic Speed Controller (ESC).
As brushless systems are with strong power, to avoid equip-
ment damage and personal injury caused by improper use, it is
strongly recommended that users should read this manual
before using the product , and strictly follow the prescribed
operating procedures.
No liability shall be assumed for any equipment damage and
personal injury resulting from the improper use of the product,
including but not limited to compensation for indirect loss.
At the same time, we assume no liability for any equipment
damage and personal injury caused by unauthorized modification
of the product.
We reserve the right to change the design, appearance, features,
and use requirements without notice.
