Omega WiFi Amp, Official User Manual, Page: 14 / 29

Click on the ‘Apply’ button. Wait for a few seconds as the Omega WiFi Amp restarts. Once the
unit has turned back on, it is ready for use.
*We suggest that your current WiFi Security Key should not include strange symbols such as $
*& ^ , as these might lead to a failed configuration. Characters and numbers are highly
recommended.
Step 8. Wireless Repeater mode configure successfully!
*The default wireless SSID and security key is the same as your AP/router, after successful
installation.
*The Management Page will be locked after your successful configuration. You CANNOT log
into the management page via http://192.168.10.1. If you want to log into the Management
Page again, please hold the
‘Reset’ button for 8-10 seconds to make all settings revert to
Factory Default Settings. Once the unit has reset, reconfigure the Omega WiFi Amp again.
Omega WiFi Amp - Official User Guide - 1_en
Page 12 of 27