4
Set Up Your Welder
•
The welder should be placed on a stable and flat working bench for
operation.
•
Connect the welder to the power supply with the power cable.
•
If using the argon mode, connect the argon hose securely to the argon
inlet at the rear of the welder.
•
Adjust argon flow to 6 litres per minute. And check to make sure there is
no leakage.
•
Switch on the power button.
•
Now the welder is ready to use.
Safety Notes
Thank you for choosing the Fine Wire Welder. This welder is designed
for producing commercial grade thermocouple hot junction. It’s easy
to use and operate. But it is still very important to read the instructions
carefully prior using the welder.
•
Always wear protective safety glasses during welding. Do not view
the weld discharge with the naked eye.
•
Do not touch directly welding electrode during welding operation.
•
Follow the instruction carefully and use the correct power supply.
Always wear protective eyewear during welding!
NOTE
Always Wear
Eye Protection
