Page - 10
Page - 11
Step 1 Have all transmitters which are to operate the system at hand.
Then, turn the ignition “on”.
If the Unauthorized Transmitter Alert feature is on, programming a
transmitter to the system will activate the Unauthorized Transmitter
Alert warning and the extended Status Light visual display; for the
next 48 hours the siren will sound a brief series of chirps every time
the vehicle’s ignition key is turned on. The following special
procedure programs the transmitters and also turns the Unauthorized
Transmitter Alert feature on.
Step 3 Press the “lock” button on each remaining transmitter one at a time.
The system will chirp the siren once to confirm that each was
learned. The transmitter’s other three button's functions will
automatically be assigned when the “lock” button is learned. If a
code is not received within a 10 second period, the learning process
will automatically terminate, as indicated by another siren burst.
Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch
5 times. The horn will briefly sound, confirming that for the next 10
seconds the system is ready to learn a transmitter/controller code.
To enter a code, simply press and release the “lock” button. When
the first code is learned all existing stored codes will be erased.
Special Programming procedure to turn On the UTA feature: Using this
method to program transmitters or optional controllers, and to turn on or turn
off the Unauthorized Transmitter Alert feature.
Follow the same steps as the Standard Programming, but on any
transmitter/controller being programmed instead of pressing the “lock”
button, press the “lock” and the “unlock” buttons together. This action
turns on the Unauthorized Transmitter Alert feature and at the same time
programs the transmitter or controller to operate the system.
Standard Programming: Using this method to program additional or
replacement transmitters does not turn on or otherwise affect the
Unauthorized Transmitter Alert (UTA) feature.
Remote Starting Diagnostics
Whenever the system is placed into Valet Mode, the Status Light
illuminates solid. However, when this first occurs, the Status Light will flash
1 to 6 Green flashes before resuming solid illumination. This indicates why
the engine stopped running from the last previous remote starting attempt.
Unauthorized Transmitter Alert
TM
(UTA) is a protection feature which
may be turned on by the user (see the next section, “How to Program
Transmitters”). When this protection feature is utilized, whenever a transmitter
is added to operate the system, for 48 hours afterward a warning consisting
of a brief series of horn chirps sounds every time the vehicle’s ignition is
turned on.
Also during this 48 hour warning period, the 10 second Automatic
Transmitter Verification visual display will increase to being displayed for
90 seconds instead of 10 seconds. When this feature is used and activated,
after 48 hours the warning chirps disappear and the Status Light flashing the
number of transmitters returns to being displayed for 10 seconds.
Automatic Transmitter Verification
TM
shows the total number of
transmitters which can operate the system, by flashing the Status Light with
this number for 10 seconds every time that the ignition key is turned on. An
Optional Status Light needs to be added to the system to utilize this
feature.
The Omega RS-310 features several security safeguards in one of the
most vulnerable areas of any remotely controlled system.
Transmitter Protection
Code Jumping
TM
It is quite easy, with the proper equipment, to record an
alarm or keyless entry system’s transmitter signal, and simply play the
captured signal back to the system to defeat it. The RS-310’s Code
Jumping renders such “code grabbing” devices useless by randomly
changing each signal that the transmitter sends.
11) 1 Flash = Programmed run time expired.
12) 2 Flashes = Brake was pressed or hood opened.
13) 3 Flashes = Engine stalled or bad tach signal.
14) 4 Flashes = Received transmitter command to stop.
15) 5 Flashes = Gear selector removed from “park”.
16) 6 FLashes = Low voltage.
The RS-310 system is capable of being operated by as many as four
transmitters. Additional transmitters must be programmed to the system in
order to operate it (the originals, were programmed at the factory).
It is during the programming procedure that the Unauthorized Transmitter
Alert feature may be turned on.
How to Program Transmitters
