8
SAFETY INSTRUCTION
pH / ORP transmitters should be installed and operated by qualified person who
are familiar with the work.
Transmitters with problems should not be installed and used.
pH / ORP transmitters should be used under the required working condition.
pH / ORP transmitters should be open and repaired by clients them selves.
Mollified pH / ORP transmitters should not be used. Producers and suppliers do
not bear responsibility for the damage and lose caused by modifying instruments
without permission. Clients should bear all the risks.
This instrument has a protection level of IP65. Please use waterproof cable glands
when you connect the line. Also, please loose it when you open the cover. After
connecting the line, please tighten the cable conductor according to the above
table 3 with attached tie line, or it will cause danger because cable conductor or
interface falls off when open the cover.
Please make sure to cut the power when you open the cover to carry
through any operation.
