Omega ORU50PX, Instructions For The Use And Care And Installation

Page: 6 / 9

3. OPERATION:
Note: Before the unit can be operated, it must be ducted.
1. Connect the plug to the power at the power socket.
2. Turn power on at the power socket which will start the appliance.
3. To turn the appliance off, turn the power off at the power socket.
If your range hood does not function correctly when attempting any of the above,
please ensure that your power is on and is functioning correctly. If the power
seems to be functioning correctly in the house, there may be a problem with the range
hood. Please call your authorised Omega service centre in this case to organise a
service call.
4. LIGHT REPLACEMENT
1. Turn the power off and disconnect from mains power.
2. Remove filter and read labels regarding maximum lamp ratings.
3. Press the light face and remove by turning in anticlockwise direction.
4. Pull out the halogen light bulb carefully and replace by same type and same rated
halogen light bulb (12V 40W MAX). NOTE: take care as halogen lamps can get hot.
5. CLEANING
SAFETY PRECAUTION
Before cleaning your range hood or performing any maintenance, please ensure
that the range hood been disconnected at the power socket.
Do not use abrasive cleaners to clean the range hood. The use of warm soapy
water and a cloth are recommended.
Ensure that the range hood is cleaned regularly, as a build-up of grease and fat may
occur otherwise.
The filters on the range hood must be cleaned regularly to maintain efficiency, and
prevent grease build up.
It is recommended that this is undertaken every 4
– 6 weeks, depending on
frequency of use.
The filters can be cleaned with warm soapy water or a cloth, or they may be
washed in a dishwasher. If washed in a dishwasher, discolouration may occur to
the mesh and frame.
Cleaning of the range hood must be performed as described above, otherwise
there is a possibility of a fire hazard due to grease and fat build up.