Omega ORU50PX, Instructions For The Use And Care And Installation

Page: 5 / 9

2. INSTALLATION
Please ensure that before installing the range hood all power has been switched off.
Installation must be in accordance to the local electrical authority and codes. This
range hood must be earthed at all times for the operators’ safety.
The power socket for the range hood should be positioned to enable the user to turn
the power on and off easily (as there are no controls on the appliance) and to turn the
appliance off to enable cleaning and any maintenance required.
Ensure that when installing the range hood, that it is protected from any possible
damage from tools etc.
Ducting for this unit must be installed in accordance to the local authority. Ensure that
the fixings used for this range hood are suitable.
Check the area where the range hood is to be fitted, to ensure that it is
structurally sound.
Before using the appliance, remove the plastic coatings protecting the stainless
steel finish.
Ensure that the wall is structurally sound, and is capable of carrying the weight
of the range hood.
It is recommended that the dimension be checked on the range hood before
installing.
1. The cooker hood should be placed at a distance of 65-75cm from the
cooking surface for the best effect.
2. Drill a hole in the cupboard, 490*265(mm) for model ORU50PX. Make sure
the distance between the edge of the hole and the edge of the cupboard
edge is at least 35mm. Remove the filter. Remove the two halogen lights
(twist anticlockwise), unscrew the two screws holding the lower facia panel
and remove the lower fascia panel.
3. Fit the two flaps into the outlet (tabs facing upwards) creating the one way
valve.
4. Fit the appliance into the 490*265mm hole, and fix into place using the
supplied wood screws (8 positions).
5. Reattach the lower fascia panel using the two original 10mm screws. Refit
the two halogen lights and attach the filter.
6. Connect the electrical plug to the power socket and test that the lights and
fan operate when power is turned on.
7. Connect ducting (outlet is Ø150mm) to the outlet of the appliance. The
ducting must remove the exhaust from the room.