15
Semi-Automatic Programming According to Finish Time:
This function is used to cook according to desired finishing time. The food to be cooked is put into the oven
and the oven is adjusted to the desired cooking function and temperature depending on the food/dish to be
cooked (the manual operation symbol
will be lit). Next keep pressing on the MODE button (three
times) until “end” appears on the timer screen, and the timer display starts to flash. Adjust the finishing time
for the food you wish to cook, by using the “+” and “-“ buttons while the timer is in this position. Five
seconds after the adjustment operation is completed, the current days’ time will appear again on the screen
and the symbols “A” and will be continuously lit on the screen. The oven will operate on your chosen
function.
You can set a time which can be up to 10 hours after the current day’s time. At the completion of the set
duration, the timer will stop the oven and give audible warning. Also the symbol “A” will begin to flash on
the screen and the symbol
will turn off. After adjusting the oven function and thermostat control knobs
to their off (0) positions, pressing any button of the timer will end the audible warning and the timer will
return to a manual use function.
This function is perfect for setting a cooking completion “time of day” for food that is already cooking in the
oven (e.g. – Finish at 5.00PM) prior to leaving the house or going into the garden as examples. When this
time is up the oven will stop operating and the internal oven light will go out. Only after adjusting the oven
function and thermostat control knobs to their off (0) positions will the oven be fully turned off.
Full- Automatic Programming:
This function is used to cook for a set duration, starting after a pre-set delay. The food to be cooked is put
into the oven and the oven is adjusted to the desired cooking function and temperature depending on the
food/dish to be cooked.
First Step, Set Cooking Duration:
Repeat the procedure for setting the Semi-Automatic Time Adjustment
According to Cooking Time , starting with pressing the MODE button twice, until “dur” appears on the timer
screen. The length of time set will be the cooking time. Note that the oven is actually cooking at this point.
A cooking period between the time range of 0 and 10 hours can be set.
Second Step, Cooking Start Time:
Keep pressing the MODE button again until “END” appears on the timer
screen. When this happens, the symbol “A” and the current days’ time will be lit. Adjust the finishing time
for the food to be cooked by using the “+” and “-“ buttons while the timer is in this position. At this point the
oven turns off (it is in the delay period). Shortly after the adjustment operation is completed, the current day’s
time will appear again on the screen and the symbol “A” will be continuously light on the screen (the
will stay off until the delay period has expired). The maximum time that can be set is 23 hours, 59 minutes. It
is recommended for food safety that food is not placed into the oven more than 2 hours prior to the start
time.
The oven start time can be calculated by deducting the cooking period from the set finishing time, and will
stop at the set finishing time.
Once the delay period has finished, the oven will turn on (
will be lit) and will continue to run (as above)
for the cooking period.
At the completion of the set duration, the timer will stop the oven and give audible warning. Also the symbol
“A” will begin to flash on the screen and the
symbol will turn off. After adjusting the oven function and
thermostat control knobs to their off (0) positions, pressing any button of the timer will end the audible
warning and the timer will return to a manual use function.
This function is perfect for setting a cooking time to begin when you are not at home or around to turn the
oven on. Food to be cooked is placed into the oven for example at 3.00PM to begin cooking at 4.00PM and
to complete cooking at 5.30PM before you get home at say 6.00PM. When this time is up the oven will stop
operating and the internal oven light will go out. Only after adjusting the oven function and thermostat
control knobs to their off (0) positions will the oven be turned off.
