3.1.2 PIO_GetConfigAddressSpace
PIO_GetConfigAddressSpace(wBoardNo,*wBase,*wIrq, *wSubVendor,
*wSubDevice, *wSubAux,*wSlotBus,*wSlotDevice)
•
wBoardNo=0 to N
Æ
totally N+1 boards found by PIO_DriveInit(...)
•
wBase
Æ
base address of the board control word
•
wIrq
Æ
allocated IRQ channel number of this board
•
wSubVendor
Æ
subVendor ID of this board
•
wSubDevice
Æ
subDevice ID of this board
•
wSubAux
Æ
subAux ID of this board
•
wSlotBus
Æ
hardware slot ID1 of this board
•
wSlotDevice
Æ
hardware slot ID2 of this board
The user can use this function to save resource of all OME-PIO/PISO cards
installed in this system. Then the application program can control all functions of
OME-PIO/PISO series card directly.
Find the configure address space of OME-PIO-D144
/* Step1: Detect all OME-PIO-D144 cards first */
wSubVendor=0x80; wSubDevice=0x01; wSubAux=0x00;
/* for OME-PIO-D144 */
wRetVal=PIO_DriverInit(&wBoards, wSubVendor,wSubDevice,wSubAux);
printf("Threr are %d OME-PIO-D144 Cards in this PC\n",wBoards);
/* Step2: Save resource of all
OME-PIO-D144
cards installed in this PC */
for (i=0; i<wBoards; i++)
{
PIO_GetConfigAddressSpace(i,&wBase,&wIrq,&t1,&t2,&t3,&t4,&t5);
printf("\nCard_%d: wBase=%x, wIrq=%x", i,wBase,wIrq);
wConfigSpace[i][0]=wBaseAddress;
/* save all resource of this card */
wConfigSpace[i][1]=wIrq;
/* save all resource of this card */
}
/* Step3: Control the
OME-PIO-D144
directly */
wBase=wConfigSpace[0][0]; /*
get base address the card_0
*/
outp(wBase,1); /*
enable all D/I/O operation of card_0
*/
wBase=wConfigSpace[1][0]; /*
get base address the card_1
*/
outp(wBase,1); /*
enable all D/I/O operation of card_1
*/
OME-PIO-D144 User’s Manual (Ver.2.1, Sep/2001)
---- 24