Omega OM-EL-WiFi Series, User Manual

Page: 5 / 7

Use the button on the home screen to get more help on setting up your sensors.
Sensors can be confi gured over the air without reconnecting the USB cable.
When placing the sensor consider local heat sources and radio obstructions. Any physical obstructions
between router and sensor will affect the signal range.
The signal icon has three states:
Changing Sensor Settings over Air
2
the sensor is not
c o m m u n i c a t i n g
with the EasyLog
WiFi software
Flashing
2
the sensor has not
yet been set-up
and confi gured to
a WiFi network
Not Displayed
1
the sensor is successfully
communicating with the
EasyLog WiFi software
Solid
3
Sensor Placement
Hints and Tips
Important Safety Information
Battery Replacement
The rechargeable battery in the EasyLog product should only be replaced by Omega Engineering.
Repairing or Modifying
Never attempt to repair or modify EasyLog products. Dismantling EasyLog products, including the
removal of external screws, may cause damage that is not covered under the warranty. Servicing
should only be provided by Omega Engineering. If the EasyLog product has been submerged in water,
punctured, or seriously damaged do not use it before returning it to Omega Engineering.
Charging
Only use a USB Power Adaptor or a USB port on another device to charge EasyLog products. Read all
safety instructions for any third party products and accessories before use with this product. Omega
Engineering is not responsible for the operation of any third party accessories or their compliance with
safety and regulatory standards. We do not recommend charging the battery when the unit is at 40˚C
(104˚F) or above. Some of our products employ safety features to prevent this.
Using Connectors and Ports
Never force a connector into a port; check for obstruction in the port, make sure that the connector
matches the port and that you have positioned the connector correctly in relation to the port. If the
connector and port do not join with reasonable ease they probably do not match and should not be used.
Disposal and Recycling Information
You must dispose of EasyLog products according to relevant laws and regulations. EasyLog products
contain electronic components and Li-Po batteries and therefore they must be disposed of separately
from household waste.
WARNING:
Failure to follow these safety instructions could result
in fi re, electrical shock, other injury or damage.