Omega OFLW800W, Installation & User Manual, Page: 10 / 28

10 OFLW800W User Manual
Quick Start Guide
Prior to Operating the Front Load Washer
• CAUTION:
Before washing, please make sure the machine
is installed properly.
• CAUTION:
Clean your appliance before first use.
Your appliance was thoroughly checked before it left the
factory. To remove any residual water and to neutralise
potential odours, we recommend to clean the inner drum
by running the "Drum Clean" or other program with the
optional temperature of 90° C.
Be careful not to put laundry and detergent in the machine
when performing the Drum Clean program.
Calibrating the Front Load Washer
• IMPORTANT: It’s recommended to calibrate the machine,
so that provide the best performance. The appliance is
able to detect the amount of laundry loaded. This function
is optimising the product performance by minimising
energy and water consumption, saving you money and
time. For this reason it’s recommended to calibrate the
appliance for best use.
1. Remove all accessories from the drum and close the door;
2. Insert the mains plug to the socket;
3. Switch on the washing machine and within 10 seconds,
press "Wash Temp." and "Speed Wash" simultaneously until
"t19" is displayed;
• NOTE:
Before calibration, ensure that there is no load or
water inside the drum.
4. Press the Start/Pause button to start the appliance and
wait till “****” is displayed.
NOTE:
At the end of the cycle, the machine will sound an alert
and "End" will be shown on the display.
Before Operation
1. Plug the power plug
into the power socket.
2. Open the tap
3. Load the laundry items
and close the door
4. Add detergent
NOTE:
Detergent needs to be added in compartment I
if the pre-wash function is selected.
Operating your Front Load Washer
1. Power on 2. Select program
3. Select any options or
additional functions or
keep the default settings
4. Press Start/Pause to start
to program