background image

 

23.

 

In the event of a chip pan fire or any other pan fire TURN OFF THE COOKER 
APPLIANCE AT THE WALL SWITCH AND COVER THE PAN WITH A FIRE 
BLANKET, this will smother the flames and extinguish the fire. LEAVE THE PAN 
TO COOL FOR AT LEAST 60 MINUTES BEFORE MOVING IT. 
Injuries are often caused by picking up a hot pan and rushing outside with it.

 

24.

 

DO NOT LEAVE UNATTENDED WHILE COOKING.  

25.

 

SAFETY ADVICE IN CASE OF a PAN FIRE NEVER USE a FIRE EXTINGUISHER 
TO PUT OUT a PAN FIRE as the force of the extinguisher is likely to tip the pan 
over. 

26.

 

Never use water to extinguish oil or fat fires. 

27.

 

WARNING: If the surface of the cooktop is cracked, switch off the appliance to 
avoid the possibility of an electrical shock. 

28.

 

Metallic objects such as knives, forks, spoons and lids should not be placed on 
the hotplate since they can get hot. 

29.

 

Young children should be supervised to ensure they do not play with the 
appliance. 

30.

 

This appliance should not be installed behind a decorative door in order to avoid 
overheating. 

 

Please read all instructions before using this appliance. This book contains valuable 
information about operation, care and service. Keep this booklet in a safe place for 
future reference. Should the appliance be sold or transferred to another owner, or 
should you move house and leave the appliance, always ensure that the booklet is 
supplied with the appliance in order that new owner can be acquainted with the 
functioning of the appliance and relevant warnings.  
 
THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY, PLEASE READ 
THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE to maintain 
the EFFICIENCY

 

and SAFETY of this appliance, we recommend:

 

 

Call only the Service Centre authorised by the store where you purchased the 
cooker. Always use original Spare Parts.

 

 

This appliance is intended for non-professional use within the home.

 

Before using the appliance, read the instructions in this owner’s manual carefully.

 

 

 

 

 

 

 

 

Summary of Contents for OF694CX





















Reviews: