Omega ODW715X, Instruction Manual

Page: 20 / 31

17
Operating Instructions
Saving Energy
1.
Pre-rinsing of tableware items leads to increased water and energy consumption and is not
recommended.
2.
Washing tableware in a household dishwasher usually consumes less energy and water in the use phase
than hand dishwashing when the household dishwasher is used according to the instructions.
Starting A program
1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load
the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page
”Product fiche”. Make sure that the
water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause button, the dishwasher
will start its cycle.
Changing The Program Mid-cycle
A program can only be changed if it has been running only for a short period of time, otherwise the
detergent may have already been released or the wash water with detergent has already been drained. If
this is the case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset
the dishwasher, follow the instructions below:
1.
Open the door a little to stop the dishwasher, after the spray arm stopped working, you can open
the door completely.
2.
Press Program button more than three seconds the machine will be in program selection
mode.
3.
You can change the program to the desired cycle setting.