Omega ODO684X, Instruction Manual

Page: 7 / 20

7
Installation Instructions
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the
holes on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the
screws. If installed under a cooktop, there must be at least 50mm between the two appliances, and the
distance between the worktop and the top of the control panel must be a minimum of 25mm.
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant
to increases in temperature. In a correct installation, contact with electrical or insulated parts must be
prevented. Insulating parts need to be
fi
tted in a way to ensure that they cannot be removed by using any
kind of tool.
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
performance of the above-mentioned appliances will be negatively a
ff
ected due to emanating heat. After
removing your oven from its packaging, be sure that the oven is not damaged. If you suspect any damage
to the appliance, do not use it; immediately contact an authorized Service Centre.