background image

 

IMPORTANT SAFETY INSTRUCTIONS

 

IMPORTANT

Read the assembly instruction section and safety precautions of this 

booklet carefully before removing the contents of this carton. 

1.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience or knowledge, unless they have been given supervision or 

instruction concerning the use of the appliance by a person responsible for their safety.  Children 

should be supervised to insure that they do not play with the appliance.   

2.  In certain circumstances electrical appliances may be a safety hazard.  The unit MUST be connected 

to the electrical supply before operation to enable the electronic ignition to work. 

3.  Do not place heavy objects on this appliance. 

4.  Damage can occur to bench tops if pots and pans are able to overlap the bench top. This can result in 

heat being transferred to the bench top. Ensure that correct sized pots & pans are used. Refer to guide in 

booklet. 

5.  Do not allow pot handles or utensils to be placed near gas burners which are operating, as they can 

cause the handles to become hot to touch. Always turn handles away when small children are nearby. It 

is recommended that children are kept away from the cooktop at all times. 

6.  If the electrical supply cord is damaged, either when being installed or after installation, it must be 

replaced by the manufacturer, it’s service agent or similarly qualified persons in order to prevent a 

hazard. 

7.  The electrical and gas connections must be accessible after installation. 

8.  Electrical connection must be made as per local wiring rules and regulations. 

9.  Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking on the gas 

cooktop.  

10. DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR 

NEAR THIS APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE 

WHILE IT IS IN OPERATION. 

11. WARNING - The cooktop will become hot during and directly after use. Do not touch any components 

during this time, as they may be hot and can cause burns. 

12. Cleaning may only be commenced on the appliance once it has cooled down.  

13. When the appliance is not being used, the knobs must be kept in the ‘OFF’ position. 

14. Not to be used in a marine environment. 

15. DO NOT USE THIS APPLIANCE AS A SPACE HEATER. 

16. DO NOT MODIFY THIS APPLIANCE. This appliance is not suitable for use with aftermarket lids or 

covers. 

 

DO NOT 

   

OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION 

BOOKLET. 

DO NOT     

PLACE ARTICLES ON OR AGAINST THIS APPLIANCE. 

DO NOT 

STORE CHEMICALS OR FLAMMABLE MATERIALS OR SPRAY 

AEROSOLS NEAR THIS APPLIANCE. 

DO NOT 

USE EXTERNAL CONTROLLERS OR TIMERS ON THIS 

APPLIANCE. 

 

SUPPLIED WITH THIS APPLIANCE

 

 

 

 

 

 

 

 

 

 

PARTS: 

QUANTITY: 

USER MANUAL

 

1 PC 

SEALING TAPE

 

1 ROLL 

ADDITIONAL LABELS 

1 SET 

INSTALLATION SCREWS 

4 PCS 

ULPG INJECTORS 

1 SET (5 PCS) 

INLET ELBOW 

1 PC 

WASHERS 

3 PCS 

NG REGULATOR 

1PC 

Summary of Contents for OCG905FX













Reviews: