![background image](http://html1.mh-extra.com/html/omega/ocd45w/ocd45w_instruction-manual_4051433004.webp)
Operating your dryer
Electrical Requirements
The unit is required to be plugged into a three pin
socket that is reliably grounded.
The power supply must be 2 20-240V. Plug the
power cord into the socket.
�E
�·�
-
Loading the dryer
It is recommended that items are placed into the
dryer one at a time. This ensures they are not
tangled which results in uneven drying. When
closing the dryer door prior to starting the unit
ensure that items are not jammed in the door.
Tips before drying
Prior to loading the dryer check that the items do
not have the following the symbols anywhere on
them.If they do.do not tumble dry these items.
B
[J
Dry flat
Dry in the shade
mI
D
I I I
I I I
I I I
Do not tumble dry
Hang to dry
Drip dry
4
Check the items to be dried do not have
combustible materials or foreign objects within
them ie: lighters, hair pins, coins.
• Turn items with zippers inside out and fasten
buckles.
Dryer heat may permanently set stains, ensure
you check prior to drying that stains are
removed.
Separate dark and light colored items as you
would do when washing.
For best results load the dryer with similar
fabrics. Place small delicate items in a mesh
bag and do not overload the dryer.
•
The maximum mass is 4.5 kilogrammes of
dry textile material for the dryer and do not
overload. The tumble dryer is intended only for
drying textile material washed in water.
Drying time reference
table
Drying
Dry time
Capacity
High
Low
Approx.1kg
Approx.30min
Approx.55min
Approx. 2kg
Approx. 60min Approx.11 0min
Approx.3kg
Approx.120min
Approx.4.5kg
Approx.200min
Drying times can be affected by many factors,
such as material, bulkiness, how full the dryer is
etc. The above list is a guide only.
3. To install the hanging hook to timber, start at
Fig 2.
Fig. 3
Connector Base
4. Align hanging hooks and fasten screws tightly.
5. Install the Exhaust Connector. Adjust the
direction to suit the installation (as per
Fig 3).
6. Rotate the Connector clockwise to fix the
pipe to the Connector Base. Tighten.
7.
Using 4X12 mm screws (provided) to
fix the 2 spacers as per Fig4.
8.
With assistance, mount dryer on wall bracket.
See Fig. 5.
Exhaust Connector & Flexible Pipe
Fig. 2
Fig.4
9