background image

 

OPERATING INSTRUCTIONS   

Key Lock  

The key lock function is used to set ‘safe mode’ on the appliance and can only be used in Operating Mode 

(B-Mode). The lock function becomes active when the key Lock button is pressed for at least 2 seconds. 

This operation is acknowledged by a buzzer and the Key Lock Indicator will flash to indicate the heater is 

locked.   

  

If the heater is locked, it will only be possible to switch the appliance off by pressing

 Power On/Off

 touch 

control, all other buttons are blocked and it will not be possible to make any adjustments by pressing the 

buttons. If any other button is pressed in the lock mode,

 

the buzzer will sound and the Key Lock Indicator 

will flash.   

  

Only the switch-off operation by pressing 

Power On/Off

 touch control is possible. However, if the appliance 

is switched off, it cannot be restarted again without being unlocked.  

 
Child Lock   

The child lock function is used to lock the appliance in a complicated, multi-step process. Child lock (and 

unlocking) is only available in the S-Mode.   

First, 

Power On/Off

 touch control must be pressed until the buzzer sounds, then “+” and “.” must be 

pressed simultaneously for at least 0.5 seconds, but no longer than 1 second. Following this, touch “+” to 

activate the child lock. All four heater displays will show “

L

” as confirmation.  

  

  

  

If the minute minder timer is still running, it will proceed until “

00

” is reached and the timer will beep. After 

confirmation of timer completion, the appliance will be fully locked. None of the buttons can be used as 

long as the appliance is locked.   

  

Child lock can be deactivated in the same way that it is activated. After pressing 

Power On/Off

 touch 

control a beep is heard, “+” and “-” have to be pressed simultaneously for at least 0.5 seconds, followed by 

pressing “-” only. As confirmation for successful unlocking, “

L

” will no longer be displayed.  

  

  

  

 
 

Summary of Contents for OCC64TZW


















Reviews: