Omega OC90TZ, Instruction Manual / Installation Manual

Page: 12 / 21

11
3.3.4 Using the dual zone function
• This function only works on zones 3# and 4#.
• The dual cooking zone has two cooking areas that you can use a central section and an outer section. You
can use the central section (A) independently or both sections (B) at once.
Zone 3# Zone 4#
Activate the Dual zone
Press the heating zone selection and then the dual zone control
to activate the dual area (e.g. 6,)
The power level indicator will flash, then press “
◎
” , after 5
seconds, the indicator stop flash, the dual zone function is
activated, and power level shows “6” and “=” alternately.
Deactivate the Dual zone
Press the heating zone selection control of the dual zone, the
power level indicator will flash.
Press “ ◎ ”, and the dual heat zone will be cancelled and power
level returned to “6”.
Note:
1
、
The dual zone function is available only in 3# and 4# cooking zones
2
、
You can select the function from level 1 to level 9.
3.3.5 Timer control
You can use the timer in two different ways:
a
）
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
b) You can set it to turn a cooking zone off after the set time is up.
The timer is a maximum of 99 minutes.