Omega OBO691TGG, Instruction Manual

Page: 13 / 19

10
Operating Instructions
USING THE DIGITAL TIMER
Time of Day Adjustment:
The time must be adjusted before starting to use the oven. Following power supply
to the oven, the symbol (A) and the three “0” on the screen will begin to flash. Press
the (+) and (-) keys simultaneously. The Cooking symbol (
) will appear on the
screen and the dot in the middle of the screen will begin to flash. Using the (+) and
(-) keys, adjust the days’ time while this dot is flashing by pressing either the (+) or (-)
keys. After the adjustment, the dot will remain continuously lit.
Key Lock:
The Key Lock on the timer automatically activates after 5 seconds of inaction. To unlock the timer functions,
press & hold the Mode button for 3 seconds.
Minute Minder:
This function can be used to receive an audible warning after a pre-set time. It is used as a reminder &
does not affect the cooking functions.
Press the MODE key in the middle. The timer symbol ( ) and three “0”s will
flash on the screen. While the Timer symbol is flashing, adjust the desired
time period (HH:MM) for the warning by using (+) and (-) keys. Shortly after
the completion of the adjustment, the Timer symbol will be lit continuously and
the current days’ time will be displayed. When the Timer symbol begins to
light continuously, the minute minder has been set.
The minute minder can be set to a time between the time range of 0 and
23.59.
When the set time is up, the timer gives an audible warning and the Timer symbol begins to flash on the
screen. Pressing any key will stop the audible warning and the Timer symbol disappears from the screen.
The oven will not be turned off with this audible warning function.
There are 3 different auditable warning levels available. To choose between them, start with the timer
showing the time of day. Press the “-“ (minus) button for 1-2 seconds and the timer will give an audible
signal beep. At this stage, each time the “-“ button is pressed, the timer will sound the next audible warning
(signal beeps) in the sequence. Once the desired sound is heard, do not press any further buttons, and the
timer will save the last selected signal warning sound. This needs to be reset in the event of a power
failure.
Semi-Automatic Time Adjustment According to Cooking Time:
This function is used to cook for a set duration. The food to be cooked is
put into the oven and the oven is adjusted with the control knobs to the
desired cooking function and temperature depending on the food/dish to be
cooked. Next keep pressing on the MODE button until “dur” appears on
the timer screen. When you see “dur” on the timer screen, the symbol (A)
will begin to flash. Adjust the cooking time for the food you wish to cook by
using the (+) and (-) keys while the timer is in this position. Shortly after
the adjustment operation is completed, the current days’ time will appear
again on the screen and the symbols (A) and Cooking symbol will be
continuously lit on the screen. The oven will continue to operate on your
chosen function and the timer will begin. To cancel and return the oven to manual operation, press the (+)
and (-) keys at the same time.