Omega OBO61PXTGG, Instruction Manual

Page: 13 / 15

10
Cleaning and Maintenance
WARNING: The maintenance of this appliance should be carried out by an
authorised service person or qualified technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance and allow it to cool before cleaning your applianc
• Remove the glass lens and then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25
Watt, Type E14).
• Replace the glass lens, and your oven is ready for use.
The lamp is designed specifically for use in household cooking appliances. It is not suitable for household
room illumination.
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please
contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Oven does not switch
on.
Power is switched off.
Check whether there is power
supplied. Also check that other
kitchen appliances are working.
No heat or oven does
not warm up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature
control knob is set correctly.
Cooking is uneven within
the oven.
Oven shelves are incorrectly
positioned.
Check that the recommended
temperatures and shelf positions
are being used.
Do not frequently open the door
unless you are cooking things that
need to be turned. If you open the
door often, the interior temperature
will be lower and this may affect
the results of your cooking.
Oven light (if available)
does not operate.
Lamp has failed.
Electrical supply is disconnected
or switched off.
Replace lamp according to the
instructions.
Make sure the electrical supply is
turned on at the wall socket outlet.
The oven fan (if
available) is noisy.
Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any
bake ware are not vibrating or in
contact with the oven back panel.