EASY DECISION
INSTALLATION
The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the
ambient temperature of the room it is located in, during periods of use. The power supply to
the appliance must be cut off before any adjustments or maintenance work is done on it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet
your needs in all respects. Make sure to read the manual to obtain successful results so as not to
experience any problems in the future. The information given below contains rules that are necessary for
correct positioning and service operations. They should be read without fail, especially by the technician
who will position the appliance.
CHOOSING A PLACE FOR THE APPLIANCES
There are several points to pay attention to when
choosing a place for your oven. Make sure to
take into account our recommendations below in
order to prevent any problems and dangerous
situations, which might occur later!
When choosing a place for the oven, attention
should be paid that there are no flammable or
combustible materials in the close vicinity, such as
curtains, oil, cloth etc. which quickly catch fire.
Furniture surrounding the oven or cooktop must
be made of materials resistant to temperatures
above 85 C°.
Required changes to wall cabinets and exhaust
fans above a built-in cooktop as well as minimum
heights from the oven board are shown in the
diagram. Accordingly, a range hood should be at a minimum height of 65 cm from the cooktop. If there
is no range hood the height should not be less than 70 cm. Refer to the range hood instructions for
specific details before installation.
INSTALLATION OF BUILT IN OVEN
Insert the oven into cabinet pushing it forward fully. Open the
oven door and insert 4 washers & screws (A) into the holes on
insides of the oven frame.
The dimensions and material of the cabinet in which the oven
will be installed must be correct and resistant to increases in
temperature. In a correct installation, contact with electrical or
insulated parts must be prevented. Insulating parts need to be
fitted in a way to ensure that they cannot be removed by using
any kind of tool. Installing the appliance in the close vicinity of
a refrigerator or a deep-freezer is not recommended as the
performance of the above-mentioned appliances will be
negatively affected due to emanating heat. After removing
your oven from its packaging, be sure that the oven is not
damaged. If you suspect any damage to the appliance, do not use it; immediately contact an authorised
Service Centre.
6
