EASY DECISION
USING THE DIGITAL TIMER
Time of Day Adjustment:
The time must be adjusted before starting to use the oven. Following power supply to the oven, the
decimal point will flash. While the decimal point is flashing, use the (+) and (-) buttons to adjust the
current time (24 hour clock). When finished, leave the buttons for 5 seconds until the decimal point stops
flashing (which indicates the time is set). To reset the clock any other time, press the Program button once
(from manual mode) until the decimal point flashes, and then adjust as above.
Once the time adjustment has been made, the oven is ready to be used in manual mode or a timer set
up.
Setting the minute minder function:
The minute minder function allows you to set up an alarm that will go off after a set period of time. This
will not affect the operation of the oven in any way. It does not need an oven function to be selected to
be used (but the current time should be set).
First, press the Program button until the Minute Minder indicator (9) starts to flash and the LED display
shows a time of 00.00 (press twice from manual mode). Use the (+) and (-) buttons to adjust the time (in
hours & minute – HH:MM). Once the desired time has been set, leave the buttons for 5 seconds and the
Minute Minder indicator (9) will stop flashing, indicating that the minute minder is now in operation. The
time will count down in minutes until the last minute, then count down in seconds. When the countdown
has finished an audible alarm will start. The alarm can be turned off by pressing the Program button
again. Note that during the operation of the minute minder, the length of time can be adjusted at any
point repeating the steps above (which will then display the time left on the countdown) and adjusting
using the (+) and (-) buttons. To disable the minute minder, adjust the time back down to 00:00. The
maximum time that can be set is 23 hours, 59 minutes.
Setting the cooking duration function:
The cooking duration function allows you to set the oven to cook at a pre-set cooking function for a set
length of time, after which the oven will turn off. Select the desired temperature & oven functions with the
control knobs (the oven will start to work). Press the Program button until the timer function cycles past
the minute minder and the Auto Function indicator (7) and Manual Function indicator (8) start to flash
(the LED should show the cooking duration, which is 0.00). While the two indicators are flashing, adjust
the cooking duration using the (+) and (-) buttons (10 hours maximum). When the correct duration has
been set, leave for 5 seconds until the two indicators stop flashing and the LED displays the current time.
The cooking duration can be checked and then adjusted at any point repeating the steps above (which
will then display the time left for the cooking duration) and adjusting using the (+) and (-) buttons. To
cancel, adjust the time back to 0.
When the time has run out on the cooking duration, the oven functions will turn off, the audible alarm will
sound and the two indicators will flash. Turn off the oven functions. Press the Program button once to
turn the alarm off.
14
