![background image](http://html1.mh-extra.com/html/omega/mwtc-series/mwtc-series_user-manual_4020116039.webp)
Connector Operation
4
4-10
Here is a Figure 4-12A showing the operation status vs. the LED indications for
MWTC-D:
Operation Status
LED Indications
Open Sensor Input
Red LED blinks immediately after every Green
LED blink
Wireless Transmission,
Green LED blinks every transmission interval
when pressing I/O key
Logging Mode,
Red LED blinks once, then the Green LED
when pressing I/O key
blinks every recording interval
Wireless & Logging Mode combined,
Red LED blinks twice, then the Green LED
when pressing I/O key
blinks every transmission/recording
interval
Turning the unit off – Press I/O key
Red LED blinks three times
Low Battery –
Red & Green LED blinks together
every transmission/recording interval
Low Battery –
Red & Green LED blinks together
Open Sensor Input
every transmission/recording interval
followed by one more Red LED blink
Memory Full – Logging Mode
Red & Green LED blinks alternately 5 times
followed by 3 Red LED blinks indicating the unit
is off
Memory Full – Wireless and
Red & Green LED blinks alternately 5 times
Logging Mode combined
times followed by Green LED blinking every
transmission interval. Logging stops.
Set Up/ Configuration Mode – Press
Green LED blinks continuously every 0.5
and Hold I/O key, then press Set up
seconds
key, then release both keys
Figure 4-12A. MWTC-D Operation Status vs. LED Indicator
4.2 Mounting, Installation and Antenna Connection
4.2.1 Mounting Bracket Installation
A mounting bracket kit has been supplied with your connector/transmitter. The
diagram below shows dimensions and how to install your mounting bracket.