Specifications subject to change REV 05/04
How to Program the Features:
Step #1:
Turn off the ignition.
Step #2:
Press the valet switch 5 times, wait for audible response, and then select the feature by pressing the valet
button a number of times equal to the feature number.
Step #3:
Press the Lock or Unlock transmitter button to configure the feature as desired.
Step #4:
Repeat pressing the valet switch to access the next feature, and then again press the Lock or Unlock
button to configure the selected feature.
Smart Trigger: The Smart Trigger utilizes the Domelight Supervision circuit for the alarm’s open door trigger input-
simply program the polarity with the Smart Trigger jumper.
Feature #28
Open Door Warning Upon Arming
OFF
ON
OFF
Feature #29
III Button Operates "Panic" or 3rd Channel Output
Panic
Panic 3rd Channel
Feature #30
Remote Start Run Time 10 or 20 Minutes
10 Minutes 20 Minutes 10 minutes
Feature #31
Steady / Flashing Lights During Remote Start
Steady
Steady
Flashing
Feature #32
Gasoline or Diesel Engine
Gasoline
Gasoline
Diesel
Feature #33
Extended Starter Cranking Time Minimum- all 4 buttons used; 4 cranking times
Feature #34
“Tach Wire” or “Tachless “ Starter Operation
“Tachless” “Tachless” “Tach Wire”
Feature #35
Manual Transmission Remote Starting
OFF
ON
OFF
Feature #36
Turbo Timer
OFF
ON
OFF
Omega MAX-E
Wiring Diagram Overview
10 Amp
10 Amp
MAX-
E
Smart Trigger Port
Auxiliary Sensor Port #1
Auxiliary Sensor Port #2
Red/Black:
Brake (+)
Satellite
Relay Ports
Doorlock Port
Yellow/Green:
Factory Disarm
Output
Yellow/Red:
Factory Arm
Output
Gray: (-) Trunk
Release Output
Yellow
White
Green
Red/White & Red
Black
Pink/Black: Start Activation (-)
White: (-) Arm Input
Programming Port
Blue/White:
Safety Input (-)
P
R
N
D
L
Black/Yellow:
Tach Input
?
123
123
123
Brown: (-) Disarm Input
Pink: (-) 3rd Channel Output
(-) Door
Pin Switch
Hood /
Trunk
Switch
Or
Pin
White: (+) Parking Light Output
Blue: (-) Instant
Violet: (+) Door
Green:
(-) Door
Green/Violet: Dome
Light Output - connect to
vehicle’s dome light wire
Black/Red:
To (-) or (+) as needed
Status Light / Valet Switch
Holder Assembly
Status
Light &
Valet Switch may be
mounted separately
O
Receiver
Unit
Light
Switch
12345678901
12345678901
12345678901
12345678901
12345678901
12345678901
12345678901
12345678901
Parking Lights
(+) Door
Pin Switch
Yellow:
Ignition Input/Output
Red/White:
(+) 12 Volts
White:
Accessory Output
Red:
(+) 12 Volts
Black:
(-) Ground
✄
White:
To Starter
Red: To
Ignition
Switch
Relay
Green:
Starter Output
Starter
Orange:
Armed (-) Output
AU-SOCKET
& relay for
starter interrupt
Battery
+
30 Amp
30 Amp
Switch
Ignition
Brown: (+)
Siren
Red
wire
Siren Black wire
to Ground
Siren
Siren Output
