Omega LTUR Series, User Manual

Page: 10 / 12

10
8. Installation For Tuning Fork
Horizontal Installation:
1. Can be applied in viscosity, powder, and liquid. Do not install near substance
inlet. ( Figure 1)
2. Conduit faces downward at installation. ( Figure 2)
3. To be installed with the surface of two fork blades facing each other
horizontally. ( Figure 3)
( Figure 1) ( Figure 2) ( Figure 3)
Vertical Installation:
1. With high sensitivity, switching point is distanced 15mm away from the tip of
fork. ( Figure 4)
2. Opening of the two fork blades is to be as the flow direction. ( Figure 5)
3. Do not install near substance inlet. ( Figure 6)
( Figure 4) ( Figure 5)
( Figure 6)