background image

The system may be "Disarmed" by any of 3 methods:

1) 

Remote Control Disarming:   Press & Release the “Unlock” button

2) SILENT Remote Control Disarming:

 

  

Press & Release the 

“••”

         

 button Twice within 3 sec

Upon Disarm:

• The siren will chirp twice. 

(4 chirps if alarm has activated & reset)

• The parking lights will flash twice.
• The doors will unlock. 

(If an optional interface is connected)

• The starter interrupt will disengage.
• The LED Status Indicator begins flashing rapidly for Automatic
   Rearming, until alarm Rearms or a vehicle door is opened.

2-STAGE DISARM:

 If Disarming the alarm while it is triggered (siren sounding), the

first press of any remote control button will only silence the siren/horn. A second
press of the “Unlock” button will Disarm the alarm.

 Step 1:

With the system in the armed condition, enter the vehicle via the driver's
door 

(be aware that the alarm will trigger when the door is opened)

.

 Step 2:

Using your key, turn the vehicle’s ignition to the "On" position.

 Step 3:

Within 10 seconds, Press & Release the Valet/  Override Switch.

Page 4

Disarming the Alarm

Emergency Override

   

THE SIREN WILL

CHIRP TWICE

 

THE PARKING LIGHTS

WILL FLASH TWICE

THE DOORS WILL UNLOCK

(IF CONNECTED)

 

THE PARKING LIGHTS

WILL FLASH TWICE

THE DOORS WILL UNLOCK

(IF CONNECTED)

2 X

   

THEN WITHIN

   10 SECONDS

Summary of Contents for K9-150



























Reviews: