![Omega iDRX-ACC User Manual Download Page 30](http://html1.mh-extra.com/html/omega/idrx-acc/idrx-acc_user-manual_3915078030.webp)
iDRX-PR SPECIFICATIONS
INPUT RANGES:
±20mA; ±400mV, ±1V, ±2V, ±5V, and ±10V
Ratiometric or nonratiometric
EXCITATION:
14V or 10V @ 25mA
INPUT IMPEDANCE:
Voltage Range: 1MΩ
Current Range: 10Ω
ISOLATION:
Dielectric strength per 1 minute test based on
EN 61010 for 50 Vdc or Vrms working voltage.
Three way Isolation:
• Power to input 1800V Peak
• Power to analog output/communication 1800V Peak
• Input to analog output/communication 1400V Peak
INPUT OVER-RANGE PROTECTION:
Voltage input: 50V
Current input: 50mA
MODE:
Linear, Square root, Linear totalize,
Square root totalize
ANALOG TO DIGITAL TECHNIQUE:
Multiple slopes
READ RATE:
8 readings/second, automatic polarity
ACCURACY AT 25 °C:
±0.1% of FS ± 2 counts
TEMPERATURE STABILITY:
100 ppm/°C typical
STEP RESPONSE FOR RS485 OUTPUT:
2 seconds to 99% of the final value
(Filter time constant = 64)
RESPONSE TIME:
To verify the response time, check the carriage return
<CR>, it will be sent at the end of the response. You can
send another command after you receive the <CR>.
i.e.
send: *01X01
response: 01X01<DATA><CR>
Note: 01 is address.
WARM UP TO RATED ACCURACY:
30 minutes
INPUT POWER:
10 to 32 Vdc
POWER CONSUMPTION:
3 watts (125 mA at 24Vdc)
OPERATING AMBIENT:
-5 to +55 °C
STORAGE TEMPERATURE:
-40 to +85 °C
RELATIVE HUMIDITY:
90% at 40 °C non-condensing
J 4
J 1
+ E X C
+ V I N
+ I I N
R T N
J 2
J 3
J 2
J 2
J 2
+
+
+
Page 26