![background image](http://html1.mh-extra.com/html/omega/hhm32/hhm32_user-manual_4012418009.webp)
LCD Segment Check
Press HOLD button while turning the meter on, and all LCD segment will be
keep turn on until releasing HOLD button.
Hold Feature
Pressing the HOLD key to enter the Data Hold mode, the"HOLD" annunciator
is displayed. When HOLD mode is selected, the meter held the present
readings and stops all further measurements.
Pressing the "
H
" key again to cancel HOLD mode causing meter to resume
taking measurements.
In the MIN/MAX recording mode, press HOLD key to stop the recording. Press
HOLD key again to resume recording. (Previously recorded reading are not
erased).
MAX / MIN Record Feature
Press MIN/ MAX key to enter the MIN/ MAX Recording mode and autoranging
feature is disabled, Push MIN/ MAX key to cycle through the Max/Min/Present
readings. When LCD reads present value the "MAX MIN" annunciator will be
blinking.
To prevent accidental loss of MIN, MAX data, in this mode can only be
cancelled by pressing and hold down the MIN/ MAX key for 1 seconds to exit
and erased recorded readings.
7