3. Select “Hardware”
Æ
Device Manager.
4. In this window, you see the number of the port
selected by system auto manically. You can
change it. Please write down the port number, it
will be needed for manual connection.
Uninstallation of USB Driver
1. Start
Æ
Setting
Æ
Control Panel
Æ
Add or Remove
Programs
Æ
Change/Remove.
2. Select “FTDI USB Serial Converter Driv-
ers”
Æ
Change/Remove.
3. Click “Continue”.
4. Click “Finish”.
SOFTWARE OPERATION
For wireless mode
1. Please plug the Doungle into USB port.
2. Turn on the meter and select wireless function.
(Wireless function will be turn off automatically,
if connection can not complete within two min-
utes.)
3. Turn on “PC software” (Start
Æ
All programs
Æ
HH800SW
Æ
HH800SW).
For USB cable mode
1. Connect meter to PC with USB cable.
2. Turn on “PC software” (Start
Æ
All programs
Æ
HH800SW
Æ
HH800SW).
Description of “PC software”
1. Following window comes up automatically after
PC software turn on.
2. For first time use following communication port
setup dialog box. Comes up automatically.
3. For communication port setup please refer to
6.1.
4. After finishing communication port setup fol-
lowing Main display window comes up.
Model number shown at up-left corner varies
according to meter.
5. Explanations of comments
5.1 File
About Display
manufacturer
informa-
tion.
Exit Exit
program.
5.2
Setup
Options Environment
selection settings
(please refer to 6.2)
Communication
port
Check
Search/Settings/Connection
/Showing the current Communi-
cation port used.
5.3 Display
Graphic 1. View real time reading and
curves.
2. Window setup refer to 6.4.
Relative Set and display the difference
between two channels.
Received Signal strength indication.
Only available for meters with wireless
function.
5.4
Data Download
Download the saved data from the meter.
(Only for save/data log function mode)
