13
www.omega.com e-mail: [email protected]
Handling
Care should be taken when handling and installing
probes with coated rods to avoid scratching them.
Scratching the coating could interfere with the
probe performance.
Periodic visual inspection of the FSW is required
to check for corrosion or deposit build-up. If
deposits are found, clean the sensor to ensure
optimum performance.
The FSW should not be dropped or suffer any
impact or fall that could damage the electronics or
the thermal tips of the probe (Fig. 4 and 5).
Seal the thread with Teflon tape before
installation (Fig. 1).
Do not turn or handle by the housing (Fig. 2).
Use the correct tool during installation (Fig. 3)
Fig. 5
Fig. 4
Fig. 3
Fig. 2
Fig. 1
When cleaning the rod use a soft brush or any
other similar object.
Summary of Contents for FSW-6000 Series
Page 17: ......
Page 18: ...M 3993 1014...