orized Transmitter Alert, nor will it affect the chirps used in transmitter or features programming.
Page - 28
Feature #12 Confirmation Chirps in Valet Mode
(Factory Default Setting Off)
While the system is in the Valet Mode, the transmitter will still remotely lock and unlock the vehicle's
doors. This feature adds the confirmation siren chirps if the transmitter is used to lock or unlock the
doors while the system is in Valet Mode.
Feature #13 30 or 60 Second Alarm Duration
(Factory Default Setting 30 Seconds)
This feature allows the choice of a 30 or 60 second Alarm Duration, which is the system triggering, or
activating, sounding the siren, flashing the parking lights and locking the doors. When programming,
pressing the transmitter’s “arm/lock” button will select the 60 second setting; pressing the “disarm/
unlock” button will configure the 30 second setting.
Feature #14 Parking Light Illumination Upon Disarm
(Factory Default Setting On)
This feature affects the parking light operation when the system is disarmed. When this feature is turned
on, the parking lights flash once, and then light continuously for external illumination for 30 seconds
unless the ignition key is turned on during that time. If this feature is turned off, the parking lights flash
once only, and do not illuminate. This feature only affects the Excalibur’s parking light operation, and
not the interior light operation.
Feature #15 2nd Channel Also Disarms System
(Factory Default Setting On)
“2nd channel” is most commonly used to remotely open the vehicle’s trunk, in which case the alarm
should also disarm. This feature, turned on, configures the system to disarm when the 2nd channel is
used. If turned off, the 2nd channel output will still occur, with 2 chirps, but no light flashes and the
alarm will not disarm.
