OMEGA DPU91-BC Batch Controller System
16
The menu is constructed in a loop,
so you can move forward and
backward to select an item. After
any item is edited, the display will
return to the selected item.
This basic operating procedure repeats
throughout the DPU91 program:
1. Press ENTER for 3 seconds to enter
EDIT menu.
2. Press
►
to move to a speci
fi
c menu item.
3. Press ENTER key to select the item for
editing.
4. Press
▲
or
▼
to edit the value/selection.
5. Press ENTER to store the new value/
selection.
6. Press
▲
+
▼
to select another menu item.
Repeat steps 3-5 as required.
7. Press
▲
+
▼
again to return to normal
operation.
System Setup: Menu Navigation
NOTE:
Example only. Your display may be different.
NOTE:
The DPU91 displays
the BATCH instrument type
ONLY if the Remote Batch
Module is installed.
16. System Setup
ENTER
3s
Edit
Input Edit
Saves Changes
Input Edit Choices
(Password may
be required)
(Password may
be required)
or
or
ENTER
or
ENTER
Select another
Menu Item
Return to
View Mode
Or
2x
+
Or
®